Contact Marco Rodriguez of Cresa: https://www.linkedin.com/in/marco-rodriguez-51b8914/

Run time: 01:15:18

Don Shan

charges into the fray to share thoughts on the Lindstrom/Stelfast deal, the tariff situation, how Amazon could break in, and where opportunities still exist in the screw biz (1:23:38). Temporary sideliner,

Dick Ripley

speaks publicly for the first time in a long time, and offers a rare glimpse into his artistic pursuits (32:17). R. W. Baird analyst

David Manthey

joins

Mike McNulty

on the

Fastener News Report

to review the latest FDI results and speculate if this ride is nearing an end (53:51). Plus,

Carmen Vertullo

presents the

Fastener Training Minute

, this time recommending a must-read book for fastener professionals (1:17:22).

BONUS:

Homegrown, barn-burning rock n roll written, performed, and produced by Dick Ripley (2:06:46). Brian reports on a field trip to Chicago’s

Design Innovation Institute

, and Eric juggles recursive technical issues and untimely fastener dog intrusions. Run time: 02:11:11

Carmen Vertullo

revisits the topic of Prop 65 in the wake of his recent webinar, with the latest developments and thinking on the subject (17:35). Innovative Components founder and president,

Mike O’Connor

describes the right way to “near-shore” and how to make a better muskie bait (1:23:21). Trinity Logistics CEO,

Dan Zehnder

joins

Mike McNulty

on the

Fastener News Report

to examine what’s fueling the current FDI spike (51:45). Plus,

Morgan Wilson

and

Linh Vu

, of Emerald Expositions, preview this year’s much anticipated Vegas fastener show, also known as IFE (37:58). The

Fastener Training Minute

presents what you need to know about surface discontinuity (1:16:36). In denouement, Brian and Eric discover a clearinghouse of a different stripe, and observe that occasionally the best things are indeed free. Run time: 02:11:42

George Hunt III

of BBI discusses ways of bringing stability and success to a life in fasteners, with work and family in simple equilibrium (1:16:09). NFDA president,

Kelly Cole

joins Fastener Technology International editor,

Mike McNulty

to dissect the latest uptick in the FDI numbers on the

Fastener News Report

(45:12). Mack Brooks show producer,

Jessica Boweak

reviews the recent Fastener Fair Mexico, and sets the stage for next year’s exhibition in Detroit (32:23). Plus,

Carmen Vertullo

talks dip spinning on the

Fastener Training Minute

(1:08:24). Brian and Eric react to the latest announcement from VUCA-inducing

Amazon

, and try not to act afraid. Run time: 02:17:03

California Proposition 65

? How can you position your distribution company to thrive in a world dominated by

Amazon Business

? And who won the FTR Busch Light 30 pack at this year’s MWFA Open? Industry expert,

Carmen Vertullo

offers practical advice to the fastener industry as it ponders modifications in labeling requirements that could impact all levels of the supply chain (15:09). Modern Distribution Management president,

Ian Heller

, discusses “the Amazon effect”, why distributors are terrible at marketing, and why you should be adding value as you serve your customers (1:39:36).

Mr. Rich Cavoto

of Metric and Multistandard reports on the recent MWFA table top and golf outing (57:16). FDI numbers remain strong, although the trend may be cracking, as Baird analyst,

David Manthey

and industry anchorman,

Mike McNulty

explain during the

Fastener News Report

(1:08:58). Plus, the

Fastener Training Minute

(1:32:17), and a bonus segment with more of Carmen Vertullo discussing Prop 65 affected materials in detail (2:26:05). Mindful of all of this, Brian and Eric decide to start sharpening hooks before they're disintermediated. Run time: 02:34:08

Mr. Mike McGuire

shares his thoughts on a range of predominantly fastener-related topics, and hints of a new business venture coming soon (1:17:31). The lovely and talented

Lynn Dempsey

explains the FCH/FTI

Fastener Training Week

scholarship with past winners,

Shenice Peterson

of Empire Bolt, and

Michael Shibasaki

of Fuller Metric (23:52). Würth EVP,

Marc Strandquist

joins

Mike McNulty

on the

Fastener News Report

to discuss the latest FDI reading (46:53). On yet another zygological odyssey, the

Fastener Training Minute

with

Carmen Vertullo

explores the subject of head marking identification (1:09:39).

Bonus:

Mel Kirsner Open

winners! Brian and Eric still don’t know what Mike knows, and now they’re walking on egg shells around Marty. Run time: 01:54:37

Jammin' Jake Davis

of BTM Manufacturing and Brighton Best’s

Rosa Hearn

share their experiences from Fastener Fair USA (1:28:25). The lovely and talented

Lynn Dempsey

joined Brian as they traveled to Costa Rica for the NFDA 50th anniversary conference, and they returned with more than tan lines (15:27). R. W. Baird analyst,

David Manthey

explains the latest rockin’ FDI numbers (1:02:40). Industry expert,

Carmen Vertullo

, presents the final installment of his series on torque wrenches on the

Fastener Training Minute

(1:20:43). Plus, a mosh pit of industry interviews featuring Gary Cravens, Janet Winkleman, Hans Fuller, Bill Derry, Dave Audia, Kameron Dorsey and more.

Bonus:

Find out who won the EFC

Les Paul

guitar! Brian and Eric get their licks in as they host the fastener industry’s loudest podcast. Run time: 02:31:11

Mr. Charlie Kerr

weighs in with his reaction to the news of tariffs on imported steel (13:08). During the second big feature segment, G.L. Huyett CEO,

Tim O’Keeffe

describes growing a thriving fastener business from humble beginnings and "in the middle of nowhere", while using his writing to connect with the industry at multiple levels (1:29:58). Industry editor

Mike McNulty

has good news for craft beer lovers, as he welcomes

Bob “GQ” Baer

to the

Fastener News Report

to evaluate the latest FDI reading (59:46).

Fastener Fair USA

is just around the corner, and Mack Brooks exhibition manager,

Jessica Boweak

provides one last update before the inaugural show (41:43). Plus,

Carmen Vertullo

teaches torque tuning during the

Fastener Training Minute

(1:23:02). Brian and Eric aren’t sure about the tariffs, but they know

Bon Jovi

fans when they see them. Run time: 02:20:49

Craig Penland

explains the unique business model of Eurolink Fastener Supply Service (1:29:24). Solution Industries boss,

John Radel

talks shop, and announces a shake up of his own (24:27). Plus,

Mr. Harry Moser

of The Reshoring Initiative discusses exciting progress in the effort to bring manufacturing back to the U.S. and describes a new program designed to help importers make the right decisions (44:52).

Mike McNulty

presents the

Fastener News Report

, and welcomes Würth EVP,

Marc Strandquist

, as they discuss the latest FDI survey results (1:01:12).

Carmen Vertullo

offers still more expertise on the topic of torque during the

Fastener Training Minute

(1:25:12). Brian makes a rare appearance on Twitter, while Eric angles for a free concert T-shirt. Run time: 02:15:03

Mike Ricciardi

of ITW Shakeproof and

Bryan Wheeler

of Star Stainless report on the YFP Leadership Conference that focused on the disruptive technologies that have begun to impact the industry, launching an all new season of fastener talk radio (1:15:55). Raconteur and Fastener Professional of the Year,

Mr. Robbie Gilchrist

notes important trends to watch in the coming year (21:31). FTI editor,

Mike McNulty

hosts Baird analyst,

Quinn Fredrickson

, closing out the FDI numbers for 2017 and setting expectations for the coming quarters on the

Fastener News Report

(51:20). Fastener Fair USA show manager,

Jessica Boweak

presents the latest updates on the industry’s newest expo (43:45). Plus, industry swami,

Carmen Vertullo

talks torque on the

Fastener Training Minute

(1:09:40). Brian has returned from his walk-about with fresh supplies of

Vegemite

, while Eric wonders if that’s what the future really needs. Run time: 02:07:48

Simmi

explains state of the art forecasting, what to watch for in the coming quarters, and her choice of victuals in Vegas (1:24:04). Parker Fasteners is leading the market in the use of 3D printed samples. Millennial fastener pro,

Matt Boyd

describes their recent exhibit at IFE, and real world applications of this burgeoning technology (23:16). Baird analyst

Quinn Fredrickson

joins Fastener Technology International editor,

Mike McNulty

with the latest FDI numbers, and wider industry economic developments, on the Fastener News Report (52:37). Plus,

Carmen Vertullo

talks torque on the Fastener Training Minute (1:18:30). Brian and Eric discuss news of an unfortunate collision, but decide to question the intelligence of almost every headline they see. Run time: 02:11:51

Jake Davis

, of BTM Manufacturing, and

Baron “Best Beard” Yarborough

, of Spring Bolt and Nut, join in for the annual Vegas show round up (1:20:32). Fellow luxury resort connoisseur,

Bill Akerfeldt

of Lindstrom comments on recent price increases as well as accommodations at the show (31:01). Würth EVP

Marc Strandquist

evaluates FDI numbers with industry anchor,

Mike McNulty

, on the Fastener News Report (48:12). Continuing his recent marathon of fastener show seminars,

Carmen Vertullo

presents an extended Fastener Training Minute, addressing ROCAP testing for structural bolts (1:11:30). Plus, the lovely and talented

Lynn Dempsey

with interviews aplenty from the show floor.

BONUS:

What does industry legend,

Bill Unferth

, have to say about Bill Derry’s naughty side...? (2:05:42) Brian and Eric compare notes on spending time in the FCH booth (mostly) for another year.

Run time: 02:13:29

Holden Lewis

, discusses the success of the monthly benchmark, and also his new position as CFO at Fastenal (1:14:11). Field Fastener president,

Bill Derry

shares his philosophy and formula for success upon his induction into the Fastener Industry Hall of Fame (21:27). Fastener Technology International editor

Mike McNulty

presents the Fastener News Report with guest commentator

Dan Zehnder

, of Trinity Logistics Corporation (47:28). Emerald Expositions show organizer

Courtney Harold

previews the 2017 fastener show, newly renamed the

International Fastener Expo

(36:35).

Bonus redux:

WIFI co-founder,

Pam Berry

reports from the “inner sanctum” during NIFS 2012 (1:59:16). Also, industry consultant

Carmen Vertullo

talks thread strength during the Fastener Training Minute (1:07:21). Brian and Eric announce the release of the new “Screwgle”

FCH

search interface. They also note the troubles many people are enduring in the aftermath of back to back tragedies, and suggest listeners rise to the occasion. Run time: 02:04:45

Baron Yarborough

, of Spring Bolt and Nut reports from Houston, Texas. From higher ground in the midwest,

Jake Davis

of BTM Manufacturing drops in to share his thoughts on growing the business, the upcoming Vegas show, YFP, and a life in the fastener industry, from the filing cabinet to the warehouse and beyond (18:19).

Bob “GQ” Baer

joins industry anchorman

Mike McNulty

to explain the July FDI numbers, and also to note signs of impending price increases (55:58). Plus,

Carmen Vertullo

examines the important differences between hex bolts and hex cap screws, on the Fastener Training Minute (1:22:04). Meanwhile, Brian and Eric do what they do, and narrowly avoid an embarrassing screw up. Run time: 01:39:20

Mr. Charlie Kerr

joins in with a stream of consciousness appearance on an array of topics (1:22:33). Industry veteran,

Jonathan Koch

of Industrial Metal Finishing describes the impact of the booming energy market, and explains how LinkedIn can act as an invisible hand toward sales success (15:50). The FDI provides another shot in the arm with its latest numbers, as described by

Mike McNulty

with

Frank DeVito

of Solution Industries on the Fastener News Report (54:53).

Carmen Vertullo

has the prescription to an all too frequent bolt torquing question, during the Fastener Training Minute (1:15:43). Plus, Fastener Fair Mexico review and Fastener Fair USA preview with Mack Brooks’

Melissa Magestro

(46:59). Brian and Eric aren’t quite sick that their annual fishing trip is over, but an imminent return to the lake would be what the doctor would order, if only their insurance plan covered it. Run time: 02:09:29

Mr. Joe Volltrauer

describes his lifetime of entrepreneurial pursuit and 25 years at his most recent endeavor (1:20:24). Longevity also requires persistence and dedication, as demonstrated by industry anchorman

Mike McNulty

when he presents the 100th edition of the Fastener News Report, this time joined by NFDA president

Marc Strandquist

on the latest FDI numbers, and

Rich Cavoto

, of Metric and Multistandard, with MWFA golf outing results (43:12). FastenerTech 17 wrap up, NCFA Distributor Social report, show floor interviews with the lovely and talented

Lynn Dempsey

and YFP board member

Baron Yarborough

(30:35), and a bold statement on 3D printing from screw biz expert

Carmen Vertullo

, on the Fastener Training Minute (1:12:33). Plus, a report on logistics at the new site of NIFMSE. Operating in a free market enterprise of their own design, Brian and Eric explain that there’s really no wrong place to be, as long as you take the monorail.

Run time: 01:56:10

Chris

and

Ryan McCaffrey

of R&D Fasteners hang ten during their podcast debut (1:27:41).

Bob “GQ” Baer

and

Marty Nolan

preview the Fastener Summit (21:28). During the Fastener News Report, industry anchorman

Mike McNulty

hosts Baird analyst

Dave Manthey

to explain last month’s apparent tailslide in the FDI (58:53). Fastener top gun,

Carmen Vertullo

, pulls off a wicked

hydrogen embrittlement 360

with his top ten must-know list about this persistent industry menace (1:21:25). Plus: YFP board member

Baron Yarborough

covers the recent SEFA/SFA table top show. It's "scary but fun" as Brian and Eric goofy foot while they purvey their usual brand of industry prattle. Run time: 02:21:02

Mr. Robbie Gilchrist

, reacts to being chosen by the NFDA for its new industry accolade (1:32:48).

Christie Jones

of Spirol International Corporation explains the many benefits of new finishing process, ArmorGalv (39:24). Fastenal business development manager,

Jeff Kammerer

describes the Mansco acquistion (55:52). On the Fastener News Report,

Mike McNulty

presents the headlines and discusses the latest surge in the FDI with Bamal president,

Kevin Miller

(1:04:12). Plus,

Carmen Vertullo

gets technical on the Fastener Training Minute (1:26:16). Brian and Eric share their experiences at the recent NFDA and Pac-West joint conference, and marvel at media buzzword hype. Run time: 02:13:18

Jim “Big Papa” Kelam

, of Sems and Specials weighs in on industry trends, Vegas, retirement, and the new breed of fastener pro, along with

Jackie “Kind of a Big Deal” Ventura

(1:09:20). YFP board member,

Kenny Sanker

, describes the AIM mentoring program (18:02). Also, SEFA president,

Terry Windham

previews the upcoming joint conference with SFA (34:09). Fastener News Report anchor,

Mike McNulty

and Baird analyst,

Dave Manthey

examine the shocking FDI numbers (40:10). Plus, senior fastener industry consultant,

Carmen Vertullo

gets

fully threaded

during the Fastener Training Minute (1:03:55). Brian and Eric remain philosophical as they play their role in the perennial saga that is the thread game. Run time: 01:50:07

Rob Lucas

, of Lindstrom (1:14:46), and domestic manufacturing crusader,

Harry Moser

, of the Reshoring Initiative (20:20), present their perspectives on these and other forces as they drive the screw biz in a somewhat great leap forward. Würth EVP,

Marc Strandquist

joins industry anchorman

Mike McNulty

on the Fastener News Report to discuss surprising January FDI numbers (48:07). Plus, fastener wonk

Carmen Vertullo

explains a common problem with thread pitch and plating on the Fastener Training Minute (1:07:46). Brian and Eric uncover no ancient secrets, but keep an eye on Amazon, and struggle with their Chinese zodiac identities. Run time: 02:02:03

Mr. Leo Coar

, who notes that forty years are just the start, and things are looking good for the little guy as far as he can tell (18:55).

Andy Pels

, of ScrewCrew.com and

Mike Topolewski

, of Perigee Manufacturing, look back at the previous year, then shift focus to their positive feelings for 2017 (1:15:34). The FDI numbers for December tell of similar positive sentiment throughout the screw business, as Fastener Technology International editor,

Mike McNulty

and R.W. Baird analyst,

Dave Manthey

, explain during the Fastener News Report (43:39). Plus, industry virtuoso

Carmen Vertullo

explains the finer points of wedge tensile testing, on the Fastener Training Minute (1:09:03). Brian and Eric consider the right time of year to eat crawfish, and urge listeners to become part of their favorite online fastener sourcing network. Run time: 02:04:38

Mr. Andy Cohn

presents his thoughts in the wake of the presidential election and amid swirling talk of price increases (1:10:32). Star Stainless west coast lieutenant,

Kevin Chavis

previews the upcoming Pac-West / NFDA joint conference and table top event (27:28). Industry anchorman,

Mike McNulty

and

Kelly Cole

of Hayes Bolt find budding optimism in the latest FDI numbers on the Fastener News Report (44:38). Specifying zinc plating isn't always as simple as it may seem, as

Carmen Vertullo

describes on the Fastener Training Minute (1:04:38). Plus, have we finally discovered the true identity of

Traveling Salesman

? Meanwhile, Brian and Eric find cause to remember their Objectivist past, and make suggestions on avoiding the “T word”. The final predominantly fastener-related episode of the podcast season may be dirty, but at least it's safe. Run time: 01:59:53

Dick Ripley

announces an important acquisition for his team and describes market conditions from his sky box view (19:34).

Matt Delawder

, of SWD, and

John “Cool Hand” Butler

, of The Olander Company, are up next, to review the 2016 Vegas Fastener Show (1:11:30). Learn to step up to the plate when explaining problems to suppliers on the Fastener Training Minute with

Carmen Vertullo

(1:05:20). Also, October FDI results and the winners of this year's FTR/FTI Scholarship awards. Plus, a line up of NIFS attendee interviews, including

Eric's mom

! Brian and Eric pinch hit for McNulty, as they bask in a fastener field of dreams, come true after 108 years. Run time: 02:09:44

Jackie “Kind of a Big Deal” Ventura

and C&H International operator,

Charles Chang

open with a look at the recent bankruptcy of shipping company, Hanjin. BBI president,

Jun Xu

, discusses the implications of Brighton becoming a publicly traded company (1:15:16). MWFA president,

Bob “GQ” Baer

and

John “Cowboy” Wachman

review the recent Fastener Training Week in Chicago (27:39). The FDI ticks up, and

Mike McNulty

hosts past NFDA president,

Casey McIlhon

to review the most recent survey responses on the Fastener News Report (50:56). Also,

Carmen Vertullo

presents another informative Fastener Training Minute (1:09:06). Bonus: Exciting

NCFA Screw Open

results! Brian and Eric look at 3D parts for autos, and conclude you've won if by land… Run time: 01:51:57

Charlie Kerr

, offers his thoughts on the state of the fastener industry, the presidential race, and his favorite baseball team's chances for a pennant, it's a slice of fastener radio pie you cannot afford to pass up (1:13:20). NFDA president,

Marc Strandquist

joins

Mike McNulty

to assess the screw biz in light of sagging FDI numbers on the Fastener News Report (43:02). The crew from

Peak Innovations Engineering

discusses their ultrasonic approach to joint testing (14:41). Plus, on the Fastener Training Minute,

Carmen Vertullo

offers practical advice to solve a common thread problem (1:08:13). Like enraged chefs at a soiree gone awry, Brian and Eric launch pastry at yet more government stoogism. Run time: 02:02:52

Kelly Cole

(1:14:36), and journeyman fastener rep,

Rick Rudolph

(10:58), stop in to share their thoughts on current industry trends and issues. The laser focus continues as screw biz anchorman,

Mike McNulty

, presents the Fastener News Report and examines June FDI results with BB&T analyst,

Charles Redding

(48:45). Also,

Carmen Vertullo

presents another informative Fastener Training Minute (1:08:49). Brian heads south, and Eric offers his thoughts on avoiding the

squirrels

. Run time: 01:50:55

Bruce Wheeler

of Star Stainless makes this case during a landmark interview (1:12:42). The FDI ticks up, and

Mike McNulty

explores the reasons why, along with BB&T Capital Markets analyst,

Charles Redding

on the Fastener News Report (50:54). The MWFA table top show and golf outing were great successes again this year, as described by

Bob "GQ" Baer

,

Nancy Rich

,

Ruth Dowling

,

Steve Greenberg

and more (14:12). Plus, Beacon Fasteners sales manager,

Kameron Dorsey

drops in with updates from the FIC (39:43). Also, fastener guru

Carmen Vertullo

presents the Fastener Training Minute (103:43). Brian and Eric discuss a glitch with FCH SourceFinder and 3-D printed airplane parts, then choose to spend the rest of the month on the lake. Run time: 01:47:28

Ms. Rosa Hearn

, of Brighton Best International, who is headed to Fastener Fair Mexico, and provides translation services along the way (1:06:57). Pac-West board member,

Clay Weaver

, shares results of this year's Mel Kirsner Memorial golf tournament (34:37). If you remember when team Porteous dominated this event, you don't want to miss this report. Plus, the

lovely and talented Lynn Dempsey

interviews NCFA Distributor Social attendees, who comment on the annual gala, as well as the future of the Vegas fastener show, Larry Kelly, Cris Young, Kristen Kessler and more (10:01). The Fastener Distributor Index showed signs of improvement in April, as fastener newsman

Mike McNulty

and BB&T analyst

Charles Redding

explain during the Fastener News Report (42:38). And fastener industry consultant,

Carmen Vertullo

, reports from the ASTM F16 technical meeting in San Antonio (1:1:34). Hosts Brian and Eric do their best to provide bilingual commentary as they review the state of the fastener industry from their view, while enjoying some chilli with meat, con carne. Run time: 01:40:17

Marc Strandquist

describes the Global Fastener Leaders Summit and notes the tenor of conversation during the event (21:57). NFDA president,

Casey McIlhon

, and Fastener Technology International editor,

Mike McNulty

, assess the uptick of the most recent Fastener Distributor Index reading, during the Fastener News Report (43:07).

John Bilton

, marketing VP at Utah based distributor THB, Inc. explains how cutting edge ERP technology is helping his company thrive in an uncertain environment, even as some suppliers seem to be adding to the challenge (1:07:31). Also,

Carmen Vertullo

presents materials every fastener reference shelf must include, on the Fastener Training Minute (1:00:58). Bonus:

Link Magazine

publishes a rare Venn diagram explaining the

hydrogen embrittlement

nexus of risk. Brian and Eric reflect on the fragility of life, and consider soaring eagles and skunk seeking canine companions, concluding it's best to have as many of each around as possible. Run time: 01:44:17

Gary Polipnick

drops in to talk about his erstwhile golf career, Nascar, and a little shop (1:12:02).

Kevin Chavis

, of Star Stainless offers a run down of the recent joint conference of NFDA and Pac-West (19:00).

Aaron Shushan

of Specialty Sales describes the industry's newest fastener-related media entity, Fastener Pulse (34:06). Plus,

Mike McNulty

welcomes BB&T analyst

Charles Redding

to mull over the smoldering FDI numbers on the Fastener News Report (44:29). Also,

Carmen Vertullo

looks at magnetism and stainless steel, on the Fastener Training Minute (1:05:51). Always true to the fastener industry, and reality in general, Brian and Eric note the ominous climate of weaponized AGW alarmism. Run time: 02:06:02

Mr. Virg Lindstrom

, of Lindstrom Metric renown speaks with

Dan Zehnder

of Trinity Hardware (1:20:24). Adding his thoughts on the subject, and riding the superslide of fastener greatness, Würth Timberline president,

Russ Doran

, comments on the recent Fastener Hall of Fame rescue project (21:11), which is documented during segments featuring industry gadfly

Marty Nolan

,

Jackie “Kind of a Big Deal” Ventura

, and freewheeling fastener wildcatter,

Eric Dudas

(13:18). Always focused on fasteners,

Mike McNulty

presents industry headlines, and surveys the carnage of the January FDI along with MWFA president,

Bob “GQ” Baer

(51:54). Also,

Carmen Vertullo

delivers the Fastener Training Minute with another real-world application question (1:11:21). Assured of their own destiny, Brian and Eric distinguish between the famous and infamous as they slog along the questionable pathway to fastener glory. Run time: 01:49:33

John Butler

,

Andy Cohn

,

Pam Berry

,

Gary Polipnick

and more (18:58). Could the end of

hydrogen embrittlement

be near? Industry consultant and guru,

Carmen Vertullo

, discusses this possibility as he offers three “fastener war stories” during his latest feature appearance (1:02:47). Bamal Fastener Corp president,

Kevin Miller

, sits in with

Mike McNulty

, of Fastener Technology International, to dissect the latest FDI on the Fastener News Report (43:10). Plus, Fastener Fair Mexico is previewed with Mack Brooks Exhibitions manager,

Bob Chiricosta

(30:50). The boys examine alternate views of the current state of returning jobs to the States, decide there might be objective truth in the numbers, but come away wondering what the hell is actually going on. Run time: 01:59:38

ONE HUNDRED

episodes of the podcast,

John "Cool Hand" Butler

, of The Olander Company, and

Marty Nolan

, of R.L. English, revisit past FTR episodes and offer their observations on the impact of the show (1:23:13). Lindstrom sourcing guru,

Rob Lucas

, comments on steel prices and their likely effects on importers during the coming year (22:50). Ohio Oil and Gas Association EVP,

Shawn Bennett

, explains slumping oil prices and how domestic drillers are reacting (46:08). Also softening, the FDI numbers for November are revealed during

Mike McNulty's

Fastener News Report (1:02:57). Plus,

Carmen Vertullo

delivers another “fastener war story” on the Fastener Training Minute (1:16:36). Meanwhile, the boys take stock in the friends and experiences they've gained during their tenure as thread jockeys, and Brian explains why he will no longer have to carry his own

cutlery

to MWFA events. Run time: 02:08:42

Bob “GQ” Baer

, of Abbott-Interfast speaks with senior BB&T Capital Markets analyst,

Charles Redding

(15:55). Industry blogger,

Traveling Salesman

, shares his thoughts on the big news about NIFS (38:54). Industry anchorman,

Mike McNulty

has screw biz headlines on the Fastener News Report (47:48), and fastener consultant,

Carmen Vertullo

presents the Fastener Training Minute (1:01:09). And despite possible storm clouds, legendary Stelfast founder

Mr. Surinder Sakhuja

reminds us all to smile, during a revealing conversation with

Dan Zehnder

, of Trinity Logstics (1:07:19). Brian and Eric aren't sure they're ready for their

refrigerators

to spy on them, but decide to continue innovating the Scrubber anyway.

Run time: 01:47:50

Don “Solution Man” Shan

and fastener cowboy

John Wachman

join the FTR boys for a look at this year's NIFS (1:10:13). New NFDA president,

Casey McIlhon

, offers his vision for the national fastener organization as he takes the reigns (17:15).

Mike McNulty

and

Tom Buddenbohn

review the latest FDI numbers on the Fastener News Report (40:50). Also,

Josh Glaser

describes an all new part available from Glaser and Associates (30:48). Plus,

Jay Minichino's

FIC report (52:56),

Carmen Vertullo's

Fastener Training Minute (1:03:44), and interviews from the show floor in Vegas with the lovely and talented,

Lynn Dempsey

. Brian and Eric return to the grind, and wonder who stole their monkey. Run time: 01:54:16

Mr. Harry Moser

, explains the impact of recent moves on the Yuan on importing and domestic manufacturing (1:38:03).

Andy

and

Gary Graham

, of National Threaded Fasteners, describe how the new breed of fastener professionals uses wireless technology in their day to day roles, in the office and on the road (34:58). On the Fastener News Report, industry anchorman

Mike McNulty

and NFDA's

Marc Strandquist

break down the latest disappointing Fastener Distributor Index reading, and look for reasons to remain optimistic (1:10:57). Plus,

Carmen Vertullo's

Fastener Training Minute (1:32:24), association news from the FIC, and author,

Tom Payne

, on innovative thinking and problem solving (56:52). Bonus: The

lovely and talented Lynn Dempsey

has sounds from the show floor in “NashVegas”. Brian and Eric go moderate, for a change, and profile the FTR listener base. Run time: 02:12:23

Mr. Bruce Darling

, joins raconteurs and Trinity Hardware chief,

Dan Zehnder

, during a landmark interview (1:14:27).

Don Nowak

, of Falcon Fastening Solutions, explains

National Manufacturing Day

, and urges fastener companies to participate (:40).

Mike McNulty

presents industry headlines on the Fastener News Report, and welcomes Würth Group EVP,

Marc Strandquist

, to analyze July's sobering FDI numbers (41:00). Also,

Heidi Volltrauer

, of Volt Industrial Plastics, previews the upcoming All American Fastener Show in Nashville (26:20). Below the fold, but equally content-rich, BMB Fasteners'

Jay Minichino

delivers the FIC report (59:48), and industry educator and consultant,

Carmen Vertullo

, has the FTI Fastener Training Minute (1:07:12). Brian and Eric recount a server-related meltdown of their own, and describe their first tangible encounter with “net neutrality”.

Run time: 01:53:45

Andy

and

Gary Graham

of National Threaded Fasteners joined forces to talk about the industry, gaining their credentials, and commenting on the changing nature of the fastener business (1:27:16). Meanwhile, industry journeyman

Carmen Vertullo

speaks about current issues and why the Bay Bridge incident has been a learning experience for everyone (32:07). Fastener Technology International Magazine editor,

Mr. Mike McNulty

, presents another info-packed Fastener News Report, including exciting developments about the FDI (101:22). Also,

Jay Minichino

delivers the FIC report, and the Fastener Training Minute provides insightful comments on fastener QA (1:19:31). Brian and Eric prattle on, this time dwelling on the end of an important era in rock and roll history. Run time: 02:12:19

Don Haggerty

announces a new Stelfast location (1:24:13), and industry legend,

Mr. Robbie Gilchrist

comments on the state of the fastener industry (17:54). The FDI saw a small dip in May, and

Mike McNulty

and

Paul Tiffany

ruminate on the latest numbers on the Fastener News Report (56:27). Plus, industry guru,

Carmen Vertullo

, presents the Fastener Training Minute and previews upcoming Fastener Training Institute events (1:18:44). Also, Casey McIlhon, Tracey Lumia, Gary & Andy Graham of National Threaded Fasteners, Lori Coar, Rich Cavoto, and many more make cameo appearances. Meanwhile, based on the ITR forecast, Brian and Eric prepare to make the most of the online fastener business before the big one hits in 2030. Run time: 2:03:10

Frank Devito

, of Solution Industries (14:19), and

Marty Nolan

of R. L. English (1:15:11), to discuss the recent NCFA Distributor Social and panel event, startling industry news & developments, and their own relevance.

Mr. Mike McNulty

presents the Fastener News Report, with NFDA president,

Paul Tiffany

, commenting on the surprising bump in the April FDI reading (51:29). Plus,

Carmen Vertullo

talks vibration on the latest Fastener Training Minute (1:09:48). Along with the debonaire, Bob

"GQ"

Baer, John Wachman, and the kid from Stelfast, Ryan Kertis, it's another odyssey in online fastener radio not to be missed. Run time: 02:03:13

Mr. Marc Strandquist

(1:18:11), and MWFA president,

Rich Cavoto

(11:57), drop in to share their perspectives on the fastener business, online fastener talk radio becomes a virtual industry summit! Even more so as Fastener Technology International editor,

Mike McNulty

, and NFDA president,

Paul Tiffany

, present March FDI analysis on the Fastener News Report (49:19). Also, Carver Consulting CEO,

Carmen Vertullo

, presents the Fastener Training Minute (1:12:49), and

Jay Minichino

has FIC association calendar updates. Hosts Brian and Eric shake off the sting of tax day with thoughts of Buckeye

muskie hunting

and medical malpractice. Run time: 01:57:11

Mr. Dick Ripley

, of Lindstrom, waxes eloquent on the state of the fastener industry and his latest position within it (1:17:28). Industrial Products Company IT guy,

Michael White

, talks INxSQL (27:02), and

Kevin Chavis

of Star Stainless Screw and the Pac-West discusses the latest from Long Beach (00:46). The Fastener News Report with

Mike McNulty

is presented from the world's largest fastener show in Stuttgart, Germany (49:19). Plus NFDA president,

Paul Tiffany

on the latest FDI reading (52:30),

Carmen Vertullo

with the Fastener Training Minute (1:07:31), and

Jay Minichino

of the FIC with association news (44:09). Brian and Eric talk fastener raves, noise canceling headphones, and AGW fraud. You'll want to tell two friends! Run time: 02:04:46

Aaron Shushan

of Specialty Sales, and

Ryan Kertis

of Stelfast, drop in to explain Young Fastener Professionals (1:22:48). Fastener Technology International editor,

Mike McNulty

, dissects the latest FDI numbers, along with NFDA chief,

Paul Tiffany

, on the Fastener News Report (53:42), which also features a fastener association round-up report by

Jay Minichino

, of BMB Fasteners and FIC (1:07:37). Branam Fastening's weld stud maven,

Mr. Kurt Triptow

, rides shotgun with the boys for a few laps (12:44). Plus,

Carmen Vertullo

presents the Fastener Training Minute (1:17:10). It's a fast-paced foray on the high octane fastener freeway! Run time: 01:52:17

ND Industries

VP of Business Development,

Jim Barr

, talks fastener training, and explains ND's new line of adhesive fastening products (24:20).

Rob Lucas

, of

Fidelis Fasteners

, opines on the longshoreman's "slow down", BBI's success, and changing buying habits (1:04:56). NFDA president,

Paul Tiffany

, joins

Mike McNulty

on the

Fastener News Report

to discuss changes and a new vision for the

Fastener Distributor Index

(43:22). Plus, new FTR partners are announced. Brian and Eric make their way the only way they know how, and things go pretty well overall. Run time: 01:45:24

Mark Klosek

and

Dave Kjanek

, of the

Vertex Distribution

team, describe the current stainless market (18:40). Then, the annual Semi All-Star Panel convenes to review this year's Vegas fastener show, with

John Butler

,

Laura Vath

and

Bob Baer

spinning the wheel (1:01:14). Fastener industry newshound,

Mike McNulty

rounds up industry headlines, and explains the avalanche of support for

liberty

, as evidenced by the recent mid-terms, on the

Fastener News Report

(46:53). Plus,

Carmen Vertullo

compares fine versus coarse threads on the

Fastener Training Minute

(38:12). Brian and Eric are 2 to 1 favorites, although you shouldn't gamble on whether Brian will ever manage to find

paper towels

at Cosco. Run time: 02:14:31

Mr. Charlie Kerr

, speaks on his late father, reshoring, and the upcoming mid-term elections (1:07:47).

Jackie "Kind of a Big Deal in the Industry" Ventura

, presents the Fastener News Report, and explains the disastrous reality of "common core", the federal government's attack on public education (45:53). Leading off, the youthful and fastener-laden outside sales manager of National Threaded Fasteners,

Gary Graham

, describes his journey in this screwy industry (21:34). Plus, fastener guru,

Carmen Vertullo

, presents the latest edition of The Fastener Training Minute (1:00:17). Brian and Eric prepare for a productive and virus-free visit to Sin City, imploring listeners to make the lengthy trek to booth 1855. Run time: 02:07:14

Mike McNulty

explains the dramatic spike in the July FDI numbers, and also is joined by

Robbie Gilchrist

, who has news about this year's Gilchrist Foundation scholarship award winners (24:39). During the third installment of "Legends of the Industry", Trinity Hardware Headquarters' head honcho,

Dan Zehnder

speaks with Lake Erie Screw legend,

Mr. George Wasmer

(41:24). Plus,

Carmen Vertullo

presents the Fastener Training Minute (15:17). Brian and Eric mull over their options on addressing the ALS challenge. Run time: 01:31:51

Jay Queenin

and

Kelly Cole

, of

Specialty Bolt & Screw

, explain their new partnership and plans to expand internationally (1:01:06).

MWFA

president,

Rich Cavoto

, recaps this year's table top and golf event (17:21). Fastener Technology International editor,

Mike McNulty

presents the Fastener News Report and is joined by

Holden Lewis

of BB&T Capital Markets with the June FDI report (37:50). Hosts Brian and Eric lament missing some of the fun at the summer fastener events, but fondly remember the

fillets

and rollers they enjoyed instead. Run time: 01:41:36

Stelfast

president,

Simmi

, presents her perspective on various fastener industry issues, including the Taiwanese plating situation, and goes on to describe her involvement with an all-new organization, designed to enable success for fastener professionals across the industry (1:27:45). Fastener Technology International editor,

Mike McNulty

, delivers top industry headlines, and BB&T analyst,

Holden Lewis

, is grilled on the startling May FDI numbers by a special guest interviewer on the Fastener News Report (55:22). Bay Standard Manufacturing's, the formerly erstwhile fastener man,

Robert Rodgers

, kicks things off with his take on outstanding threaded rod anti-dumping litigation (25:57). Plus, a new opportunity to win a full scholarship to the FTI's coveted

Certified Fastener Specialist

program is announced (9:07). New Feature: The

Fastener Training Minute

, with veteran industry consultant,

Carmen Vertullo

(1:22:22). Brian and Eric, meanwhile, sharpen hooks and clean out the boat of last season's plastic worms, as they prepare for success in their pursuit of trophies across the flats. Run time: 02:02:23

Mark Quebbeman

(01:03:02), and

Jason Sandefur

of GlobalFastenerNews.com (20:16). Plus, FDI numbers for March with

Mike McNulty

and BB&T analyst

Holden Lewis

(38:15). Bonus:

Joe Truckey

explains this year's win at the Mel. Lots to chew on during another fine episode with Brian and Eric. Run time: 01:43:37.

Trinity Hardware Headquarters

owner,

Mr. Dan Zehnder

drops in for an update, and makes clear why his company's fourth year is a fond but distant memory (1:06:10).

Ruth Dowling

joins Fastener Technology International editor

Mike McNulty

on the

Fastener News Report

to report on the recent Fastener Fair Mexico, from which she returned virtually unscathed (40:08). Plus,

John Wachman

of Desert Distribution describes the exciting new developments at the

Fastener Training Institute

(15:46). Brian and Eric plow ahead. Run time: 01:27:41

Aaron Shushan

of manufacturer rep agency

Specialty Sales

attests (20:10). In contrast, the sour notes of government overreach have inspired a burgeoning movement to squelch the music, as

Goldwater Institute

veteran constitutional attorney,

Mr. Nick Dranias

, explains (1:07:21). Meanwhile, the fastener industry has maintained a steady chord during the first quarter.

Mike McNulty

and

BB&T

analyst,

Holden Lewis

discuss the reasons why as they review the latest

FDI

reading on

The Fastener News Report

(41:48). Hosts Brian and Eric pay tribute to a late comic genius, and allegorically use one of his classic gags as a call to curb D.C.'s clangorous crooning. Run time: 01:44:55

of the MFDA reports on the recent economic summit meeting in New York (10:51). Pac-West president,

Tracy Lehman

, and NFDA VP,

Paul Tiffany

, recount the recent events at the joint association conference in Palm Springs (1:08:01). BB&T analyst

Holden Lewis

joins

Mike McNulty

on the

Fastener News Report

to explain the seasonally adjusted FDI numbers (41:02). Brian and Eric announce the new

FCH Quote Scrubber

, and contemplate the deeper meaning of fershmoozlement. Run time: 01:41:33

The Fastener Connection

and SFA, and second generation fastener man,

Michael Rodriguez

, tells it like it is (1:01:06). Fastener software baron,

Bob Reynolds

, is heading back to Vegas for the annual

INxSQL

user group meeting (20:05).

Brighton Best

VP of sales,

Steve Andrasik

joins

Mike McNulty

on the

Fastener News Report

(40:39). Brian keeps shoveling snow, while Eric hangs out in the igloo. Run time: 01:39:47

MaryLouise Eckman

, of

All Points Fasteners

, tells her tale of non-conventional fastener success (1:14:20).

Reshoring Initiative

founder,

Mr. Harry Moser

, joins

Mike McNulty

on the

Fastener News Report

to explain the current state of bringing manufacturing back to the U.S. (48:27) Plus, heat treating expert,

Brian Christianson

, of

South Holland Metal Finishing

, discusses REACH standards and what they mean to fastener distributors selling abroad (17:27). Tidbits from around the industry, and complaints about the cold, the warming, and conflict minerals reporting, it's more of the same digital effluvia you've come to know and love. Run time: 01:56:13

Stelfast

president,

Simmi

, presents her optimistic view of the fastener world to launch the 2014 season (1:08:52). Also,

NFDA

and

Hodell-Natco

president,

Kevin Reidl

, previews upcoming industry conferences and the latest developments with the recently revived

Fastener Industry Coalition

(18:22). On the

Fastener News Report

,

Mike McNulty

delivers top industry headlines, and reviews the

FDI

reading for December with

BB&T

analyst,

Holden Lewis

(41:06). Eric oddly claims the sun impacts Earth's weather, while Brian dons an electric winter jacket, just in case. Run time: 01:37:54

Mr. Dan Zehnder

, who shares his thoughts on the state of the industry and describes exciting expansion at

Trinity Hardware Headquarters

(21:52).

Brighton Best International

director of purchasing,

Jun Xu

, explains progress of the PFC roll up, and announces a new training program being offered to the industry (1:13:04). On the

Fastener News Report

,

BB&T

analyst,

Holden Lewis

, breaks down the sluggish November FDI reading, and

Mike McNulty

presents his predictions for the coming new year (43:17). Special Christmas bonus:

J.R. Prahl's, "The Gift"

, opens the show. Hosts Brian Musker and Eric Dudas hope for big changes in Washington, and prepare to start wrapping presents. Run time: 01:52:35

Metric & Multistandard

national sales manager,

Rich Cavoto

,

Daggerz

lady,

Joanne Bialas

, along with

Andy Graham

, of

National Threaded Fasteners

, discuss the big show in review (1:15:17).

Mike McNulty

and analyst

Holden Lewis

present reasons to be optimistic, as the FDI tracks back upward, during a jam-packed edition of the

Fastener News Report

(45:27). During his FTR debut,

Mr. Paul Vittori

, of

The Socket Source

, wonders aloud what happens now to PFC’s former suppliers (23:54). Plus, direct from the floor of The Sands, interviews and fastener word association with

Andy Cohn, Todd Walters, Swetu Chheda, John Gaudette, Allan Weitzman

, and more. Hosts Brian Musker and Eric Dudas do what they do, and note their relentless and ongoing commitment to serving as paragons of online fastening teamwork. Run time: 01:58:41

Mr. Steve Andrasik

, summarizes the Porteous acquisition.

Rob Lucas

, of

Fidelis Fasteners

, explains what the deal could mean for the industry, as well as the entire master importer model (1:09:23). On the Fastener News Report,

Mike McNulty

talks with BB&T analyst,

Holden Lewis

, on the shocking dip of the

Fastener Distributor Index

(42:27). Plus,

Don “Solution Man” Shan

explains developments at

Solution Industries

, including a new branch location and the addition of new A-team members (18:30). Hosts Brian Musker and Eric Dudas are glad to be open for business, especially as Brian describes his penchant for over-priced smart phone accessories. Run time: 01:44:21

Wurth Group

, Mr. Marc Strandquist, announces his company's ambitious expansion plan (1:03:37).

WIFI

members, Pam Berry and Jennifer Friel, preview their upcoming NIFS program (17:59). Also,

NCFA

president, Marty Nolan, joins Mike McNulty on the

Fastener News Report

to describe his organization's latest work to advance the newly constituted

Fastener Industry Coalition

(40:10). Hosts Brian Musker and Eric Dudas recount their iOS7 upgrade experiences and decry the fraudulent and dangerous "climate change" movement. Run time: 01:37:19

Mr. Charlie Kerr

, of legendary socket producer,

Kerr Lakeside

(1:08:30). A diminutive set screw brings

Fastener Specialties Manufacturing

proprietor,

Rick Perkaus

, onto the scene to discuss breaking barriers, business conditions and more (19:53). On the Fastener News Report, managing editor,

Mike McNulty

, has top stories and quizzes

BB&T

analyst,

Holden Lewis

on the August

FDI

results (42:40). Plus, news of another industry acquisition and breakthrough 3D printing tools make the headlines. In the aftermath of Apple’s latest product announcements, hosts Brian and Eric wonder aloud if they will be enough to kickstart the heretofore avant-garde tech company past market rivals. Run time: 02:00:31

Mr. Don Haggerty

, of

Stelfast

, is keeping a sharp eye on developments surrounding the latest anti-dumping claims, and he shares his best guesses as to where the new petitions will lead (59:46). On the

Fastener News Report

, the fearless

Mike McNulty

delivers industry headlines as well as a powerful dissertation on the current attack on the Fourth Amendment (43:41). Also,

Russ Doran

previews the upcoming

Pac-West

fall conference, and describes the finest achievements of his soon to expire presidential term (19:20). Brian and Eric aren’t sure if they’re ready for the end of summer, or the beginning of socialized medicine, so they distract themselves with an improbable contest between beavers and moose. Run time: 01:30:44

Porteous Fastener Company

? How is additive manufacturing and 3D printing impacting the fastener industry in today’s market? And what is the significance of the FDI and PMI divergence in July?

Bob Porteous

shares his thoughts and hopes for the future (1:04:33). Top

A. Raymond Tinnerman

R&D engineers explain their efforts in utilizing additive manufacturing technology in the current fastener world (18:20). And

Mike McNulty

, along with BB&T analyst

Holden Lewis

, seeks perspective in the modern world’s soupy reality during the

Fastener News Report

(44:52). Meanwhile, hosts Brian Musker and Eric Dudas lament past errors while they dream of the abundant oyster crackers to come. Run time: 01:37:57

NFDA

speaking out? And who is the “other” Jim Sullivan? Industry oracle,

Mr. Andy Cohn

, of

Duncan Bolt

, shares his thoughts on these and other issues (59:31). On the Fastener News Report, market analyst,

Holden Lewis

, and

Mike McNulty

discuss the

June FDI

results (31:30). Plus,

Rich Cavoto

, of

Metric and Multistandard

, announces the results of the 61st annual

MWFA

golf outing (17:27). Upon their return from the wilds of the north, hosts Brian Musker and Eric Dudas are no worse for the wear. Or are they…? Run time: 01:45:36

NFDA

president, and

Hodell-Natco

chief,

Mr. Kevin Reidl

, presents his vision for the year ahead (1:03:49).

BB&T Capital Markets

analyst,

Holden Lewis

, joins

Mike McNulty

on the

Fastener News Report

to review the May

FDI

numbers (34:39). Plus,

Joe Greenslade

makes a cameo appearance during the NFDA panel discussion. Hosts Brian Musker and Eric Dudas recap

Fastener Tech ’13

and their breakout session, which described the potential effects of exponential growth on technology and manufacturing. They also consider a post-singularity future in which you could leave your hamburger anywhere and not worry about anybody eating it. Run time: 01:37:46

Fastener Tech ’13

is right around the corner, and

Team FCH

prepares to expound on this and related ideas during their multimedia break-out session at the conference. VP of sales and marketing for

Elgin Fastener Group

,

Mr. Marty Goeree

, explains the progression of one of the industry’s most aggressive acquisition strategies (53:15). On the Fastener News Report, intrepid fastener newsman

Mike McNulty

lays out industry headlines and speaks with incoming

Nucor

fastener sales manager,

Chris Gasser

(31:25). Hosts Brian Musker and Eric Dudas consider the emerging technology of

3D printing

(16:46), and identify a deadly example of progress gone awry. Run time: 01:21:51

Jackie Hunter

and

Jim Overlin

, of

Stelfast

, who see improving conditions and make an exciting announcement about a new product line for the industry's most trustworthy master distributor (1:11:18). On the

Fastener News Report

, industry anchorman,

Mike McNulty

presents fastener industry headlines and discusses April

FDI

results with analyst,

Holden Lewis

, of

BB&T Capital Markets

(39:49). Plus, reports on the

NCFA Distributor Social

,

All American Fastener Show

, and Pac-West’s

4th Mel Kirsner Memorial Golf Tournament

(14:43). Dramatically,

Solution Man

crashes onto the scene, making his fastener radio debut, just as others crash into the panel discussion arena. Run time: 01:39:26

John Butler

, of

K & L Sales

, and

Andy Pels

, of

ScrewCrew.com

, welcome globetrotting fastener industry pundit,

Rob Lucas

, of

Fidelis Fasteners

. With fresh insights from the

Taiwan Fastener Show

, the trio explores the outlook for the balance of the year, and considers the implications of a shifting supplier environment (50:05).

Mr. Jason Sandefur

, of

GlobalFastenerNews.com

, presents the

Fastener News Report

, with updates on the

Bay Bridge

fiasco,

Nucor

anti-dumping, less than stellar performance from

Fastenal

, and much more (33:53). Plus, new sponsor,

Buckeye Fasteners

, joins the team! Download an app that actually pertains to fasteners (11:44), and learn the truth about grade 7, as you discover there is no substitute for

FTR

. Run time: 01:34:57

consultant

,

Mr. Carmen Vertullo

, discusses what could have caused bolts to fail even before the project has been completed (19:02). Industry

blogger

,

Traveling Salesman

, and

Rich Cavoto

, of

Metric & Multistandard

, hope to see improved business conditions (69:48). In the meantime, they prepare for the spring fastener meetings and the new baseball season while they peer into their smartphones.

Mike McNulty

and BB&T analyst,

Holden Lewis

, present the favorable

March FDI

results during the

Fastener News Report

(45:06). Hosts Brian Musker and Eric Dudas note the passing of

The Iron Lady

, even as they recognize the onset of the new fastener world order. Run time: 01:50:19

Federal Reserve

economist,

Mr. William Strauss

, explains the role and methods of our central bank (73:22). Guest-host,

Bob Baer

, of

Abbott Interfast

, joins the discussion, adding his unique style of thinking to the conversation. On the Fastener News Report,

Mike McNulty

covers several important stories, including a shake up at

Cardinal Fastener

, and yet another large acquisition announcement. He also speaks with new

IFI

chairman,

Steve Paddock

, about the biggest challenge facing the industry, and also announces this year's

Soaring Eagle Awards

(43:46). Plus,

Lou Boyd

, of

The Olander Company

, reviews the recent

Pac-West

table top and spring meeting and discusses business conditions in the Silicon Valley (21:10). Hosts, Brian and Eric, recount their recent sojourn to central Wisconsin, which was a great place to visit despite the brutally cold temperatures and dearth of good taco stands. Run time: 02:10:39

Vince Chiappone

, describes his experience taking the helm at

The Richard Manno Company

(85:41). Kind of a “big deal” in the fastener industry,

Ms. Jackie Ventura

, who steers her own ship at

Fasteners and Industrial Products

, shockingly explains why her choice in smart phones is NOT an

iPhone

, and also previews the upcoming

NCFA Distributor Social

(27:56). Also, the

FDI

reading took a dramatic downturn in February.

Mike McNulty

and BB&T analyst,

Holden Lewis

, consider the causes, and also review the MSC and Barnes Distribution deal (55:54). Meanwhile, hosts Brian Musker and Eric Dudas take nothing for granted as they discuss difficulties with the Mars Curiosity rover,

HAL 9000

, and ubiquitous surveillance cameras. The cyborgs may be coming, but FTR listeners will be prepared. Run time: 02:06:10

Nick Smith

, of

Nick's Fasteners & Supply

, discusses life on the fastener frontier (63:17).

Steve Andrasik

, of

Brighton Best International

, joins

Mike McNulty

on the

Fastener News Report

(44:15). And

Pac-West

VP,

Ms. Tracy Lehman

, previews the upcoming table top and spring conference of the west coast's leading trade association (22:32). Hosts Brian Musker and Eric Dudas worry about counting letters, and ruminate over the impending government-mandated "

healthcare

" onslaught. Run Time: 01:43:58

FDI

rebound triggered by legitimate market growth? And what would happen in the event of a total ban on threaded fasteners?

Stelfast

president and industry rock star,

Simmi

, fires off with her perspective (74:00).

Mike McNulty

and

BB&T

analyst,

Holden Lewis

, unload with the latest FDI results (46:25).

MWFA

president,

Mr. Matt Delawder

, shares his thoughts on current market conditions, and describes exciting plans for Fastener Tech '13 (21:32).

Bonus:

Imagine no threaded fasteners (70:34)! Hosts Brian Musker and Eric Dudas keep their powder dry while considering a trip to Stuttgart. Run time: 01:54:38

Dan Zehnder

welcomes industry magnate,

Mr. Ed McIlhon

, of

Assembled Products

, to the latest installment of

Legends of the Industry

(79:13). It’s amazing what can happen during a simple test of a new phone system. Industry veteran,

Paul Cabot

, of fastener distributor

Main Source

, describes current conditions in the northeast, and recounts his foray into the fastener dot-com bubble (20:34). Also, on the

Fastener News Report

, the ever fastener-focused

Mike McNulty

talks with

Tim Busching

, of

Elgin Fastener Group

, about their recent partnership announcement with

Brighton Best International

and more. Affable hosts Brian Musker and Eric Dudas note the industry’s interest in wind energy, and discover a paradoxical and under-reported ornithological tragedy. Run time: 01:57:54

semi-all star panel

to explore the future of the fastener industry after reviewing the year gone by.

John Butler

, of

K&L Sales

, the iPhone-toting

Andy Pels

, of

ScrewCrew.com

, and the indefatigable,

Mr. Tom Buddenbohn

, of

Technology Components Southwest

, share their insights and predictions (81:14).

BB&T

analyst,

Holden Lewis

, joins

Fastener Technology International

editor,

Mr. Mike McNulty

, on the

Fastener News Report

to discuss the latest

FDI

reading, which crept up slightly in December (50:01). Plus, the industry locks and loads as

Fidelis Fasteners

founder,

Rob Lucas

, fires at point blank range while explaining his thoughts on the recent round of industry consolidation (14:55). Hosts Brian Musker and Eric Dudas aim toward a future of mobile network access even as they

stockpile their ammo

for the future of the fastener industry. Run time: 02:24:29

Mr. Charlie Kerr

, of

Kerr Lakeside

, to discuss the possible impact of the

fiscal cliff

on family operated fastener companies (80:19).

Mike McNulty’s Fastener News Report

covers industry headlines and the free-falling

FDI

numbers from November, along with

BB&T

analyst,

Holden Lewis

(47:06). He also talks with

Ruth Dowling

, of

Ningbo Jinding

, about her experience at the recent Brazil Fastener Show in Sao Paulo (66:11).

NFDA

president,

Jay Queenin

, describes the “new era” and evolving role of the country’s largest national fastener association (22:06). Plus, news from the

MWFA

,

NCFA

and the longshoreman’s strike. Special bonus Christmas appearance by

The Fastener Chipmunks

(79:14). Hosts Brian Musker and Eric Dudas wax eloquent on holidays of yore, and note the chance appearance of a new fastener dog on the program. Ever have that dream where you're helplessly falling? The final episode of 2012 is kind of like that. Run time: 02:13:09

Mr. Dan Zehnder

, of

Trinity Hardware Headquarters

, reunites legendary industry brothers,

Jim

and

John Zehnder

, during a historic interview covering the origins and times of

Earnest Machine

and life in the “bolt business” (69:29).

Mike McNulty

, of

Fastener Technology International

, and

BB&T Capital Markets

analyst,

Holden Lewis

, discuss industry headlines and the sinking October

FDI

numbers on the

Fastener News Report

(44:31). Industry veteran,

Heidi Voltrauer

, of

Volt Industrial Plastics

, describes the recent 20th anniversary and expansion of her company, and also details the upcoming 2013

All-American Fastener Show

(20:10). Plus, find out what happened at the

NFDA

fall conference and who will be leading the

Pac-West

during the coming year. Hosts Brian Musker and Eric Dudas vote for their favorite BBQ city, and voice their staunch support for

sage grouse

despite the pesky oil shale conflict. Run time: 02:00:47

Vegas fastener show

is over for another year. Who lost their shirt, and who picked up a colorful new one? Which big names made the biggest splash, and where were the big splashes made during after-hours activities? Industry

blogger

,

Traveling Salesman

, along with

Rich Cavoto

, of

Metric and Multistandard Components

, join in for a detailed review of this year’s show (76:03).

Mr. Dan Zehnder

, of

Trinity Hardware Headquarters

, presents his perspective on the big event, and discusses a new series of upcoming interviews with industry legends (21:43).

Mike McNulty

and

Holden Lewis

cover the intriguing September

FDI

results on the

Fastener News Report

(50:51). Plus, from the fastener show floor,

Sara Mallo

,

Mike McGuire

,

Tracey Lumia

,

Ted Nieman

,

Bob O’Brien

,

Dave Audia

, and others play

Fastener Word Association

. And in a stunning bonus feature segment,

WIFI

founder, the amazing

Ms. Pam Berry

, guides listeners on an exclusive visit to a mysterious fastener vestibule (119:56) that will remain forever inaccessible to hosts Brian Musker and Eric Dudas, who roll dice on their industry future even as they dig out after their weeklong

fastener odyssey

. Run time: 02:10:20

FCH Sourcing Network

to connect the industry as never before? And will

Andy Pels

return to Las Vegas next month after missing last year’s big show? CEO of

Quickscrews International

,

Mr. Greg Wiener

, and

Lucky 13 Fastener Sales

owner,

Ms. Julee Mortensen

, authentically tackle the issues surrounding the upcoming election from both sides of the aisle (72:02).

Ruth Dowling

and

Cris Young

, of

WIFI

, preview their organization’s upcoming program and meeting, and share recent developments (24:34).

Mike McNulty

reports from Shanghai, China, and highlights an exciting new program coming soon from

Beacon Fasteners & Components

(49:22). Meanwhile, hosts Brian Musker and Eric Dudas note the Queen’s favorite scotch, consider

iPhone

thievery, and wonder whether

Rich Cavoto

has internalized the metric lifestyle in the truest sense of the word. Run time: 02:03:06

John Wachman

, of

Desert Distribution

, describes his experience working with members of the fastener “rat pack” during his quest for fastener nerdhood certification (74:15).

Holden Lewis

, of

BB&T Capital Markets

, joins

Mike McNulty

on the

Fastener News Report

to announce better than expected numbers from the most recent

FDI

survey (48:45). Perhaps most significantly,

Larry Kelly

, of

Buckeye Fasteners

, drops a frosty malted bombshell, sure to stagger the halls of the upcoming Vegas show (28:08). Plus,

NCFA

golf outing coverage. Hosts Brian Musker and Eric Dudas revel at the thought of the forthcoming bounty, and plan their imminent iPhone upgrade path, despite a dubious luminary's

befuddling

difficulties. Run time: 01:59:12

Mr. Ron Sackheim

, carries the torch for the fastener industry, and shares his thoughts after a lifetime in the business during an encore conversation with hosts Brian Musker and Eric Dudas (59:32). Industry rock star and

Stelfast

president,

Simmi

, discusses her views on the latest FDI numbers, the role of master importers in today’s market, and the upcoming Vegas show (23:02). Plus,

USA Fastener Group

operations manager,

Mike Weaver

, explains his company’s recent expansion announcement on the

Fastener News Report

, with

Fastener Technology International

magazine editor,

Mike McNulty

(39:09). Brian and Eric agree it would be good if 50 was actually 35, but realize that’s as likely as 6 being 9. Run time: 01:43:16

Don “Solution Man” Shan

, of

Solution Industries

, chimes in and describes how a business about nothing is actually something you should know about (71:30).

BB&T Capital Markets

analyst,

Holden Lewis

, discusses the chilly

July FDI

results along with

Mike McNulty

on the

Fastener News Report

(45:49). Plus,

Specialty Bolt & Screw

and

NFDA

president,

Mr. Jay Queenin

, describes his view of business conditions abroad, and also exciting developments at the largest national fastener trade organization (24:20). Hosts Brian Musker and Eric Dudas celebrate a couple of important milestone birthdays, as they gratefully

build their own

successful business, one thread at a time. Run time: 01:54:51

large mammal

swimming across the lake during their latest

northwoods adventure

. Was it a foreshadowing of softening markets, or of the recent droll headline out of Moscow? Despite lackluster GPS performance, the boys navigate out of the bush to discuss these and other subjects and welcome

Mr. Harry Moser

, of the

Reshoring Intitiative

, and

Mr. Andy Cohn

, of

Duncan Bolt

. An in-depth examination of the reshoring movement and related issues ensues (56:41).

Mike McNulty

breaks industry headlines on the

Fastener News Report

and presents details of the slipping

FDI

numbers from June, along with

BB&T Capital Markets

analyst,

Holden Lewis

(30:58). Also, extended interviews from the

MWFA Expo

and golf outing featuring

Rich Cavoto, John Butler, Vic LaPoma, Jackie Ventura, Matt Delawder, Kameron Dorsey, Don Shan

and more (18:18). Like America’s new healthcare system, this episode of FTR is absolutely

free

. Just don’t expect it to address all your issues in a timely or effective manner. Run time: 01:45:38

Mr. Charlie Kerr

, of

Kerr Lakeside

, discusses his view of the fastener world and beyond, just after his recent appearance at the

NCFA Distributor Social

panel discussion (69:59). Industry blogger,

Traveling Salesman

, provides further details on the event, and notes the presence of a very special fastener brew (19:49).

Mike McNulty

presents the

Fastener News Report

, featuring a discussion with

BB&T Capital Markets

analyst,

Holden Lewis

, that explores the

May FDI

numbers and some new trends that seem to be emerging (43:55). It’s a veritable celebration of the private sector, as hosts Brian Musker and Eric Dudas consider counter-rotation and spinnerbaits in advance of their annual pilgrimage to the

Canadian Shield

. Run time: 01:55:07

Fully Threaded

boys naturally think of anti-corrosive fastener materials.

Mark Alperin

and

Mark Klosek

, of

Vertex Distribution

, share their knowledge of the stainless fastener business, as well as a unique training technique that could be considered positively tasteless (56:45). From the Atlanta office of industry leader,

Stelfast

, branch manager,

Mr. Ted Nieman

, joins in to discuss his impressions of current market conditions (22:18).

Mike McNulty

opens the

Fastener News Report

by pointing out that while the fastener business might not be as exciting as the recent social media IPO mania, at least it doesn’t operate in a soon to burst bubble. Then, he speaks to

Rosa Hearn

, of

Brighton Best International

, about the huge expansion program now under way by the master-importing giant (39:20). Hosts Brian Musker and Eric Dudas note the improvement in dinner meeting table fare, and offer

cutlery suggestions

not like any others you’ve heard before. Run time: 01:36:36

Joe Peplinski

, of

Beacon Fasteners & Components

, explains how success in the fastener business is much like placing in a bass tournament.

Pacific Warehouse Sales

partner,

Kelly Lehman

, demonstrates this principle on the golf course, during the 3rd annual

Mel Kirsner Memorial Golf Tournament

(25:16). Then,

NFDA Spring Conference

attendees, including incoming president,

Jay Queenin

, along with

Don Haggerty, Robbie Gilchrist

, and others, discuss their thoughts on this year's hugely successful event and the direction of the organization (77:29). Also,

FTI

editor,

Mike McNulty

, and

Holden Lewis

present the April

FDI

survey results, and focus on the numbers and what they mean for fastener distributors (41:43). Hosts Brian Musker and Eric Dudas consider communist propaganda and the epics of Homer. Eric ponders

bass

fishing, while Brian angles for invitations. Run time: 01:41:12

Amazon.com

divert the flow of online sales from industrial suppliers? How will rapidly changing conditions in Asian manufacturing countries impact upcoming quarters for fastener distributors? When is a Din 975 NOT a threaded rod? The always insightful,

Andy Pels

of

ScrewCrew.com

, shares his thoughts, and reveals a shocking change in his mobile computing preference (16:07).

Bruce Darling

, of

Porteous Fastener Company

, wraps up his intensive two-part presentation to the

SFA

, as he describes the many dynamic forces affecting fastener suppliers (66:38). On the

Fastener News Report, Mike McNulty

welcomes

Mark Packard

, sales manager of

Rocknel Fastener

(46:07). Also, he describes a recent heartening occasion that caused him to momentarily shift his keen focus away from fasteners. Hosts, Brian Musker and Eric Dudas, consider radio

gimmickery

and

BBQ

. The subject of glow golf is revisited. Run time: 01:49:13

Pac-West

and

SFA

spring conference meetings? Did the Taiwan International Fastener Show live up to expectations? How are forward-thinking fastener companies using technology to better serve customers? And is there even one dish that cannot be improved using bratwurst?

Tom Stocking

, of

Stelfast

, provides some of the answers (21:55), as do fastener warriors from beyond the cheddar curtain,

John Butler and Marty Meyer

, of

K&L Sales

(70:49). Also,

Fidelis Fasteners

president and CEO,

Mr. Rob Lucas

, reports from Hong Kong during

Mike McNulty’s Fastener News Report

(44:16). Hosts Brian Musker and Eric Dudas agree on their favorite single malt scotch from the isle of

Islay

, and they’re feeling pretty good overall, despite some consternation over travel assignments. Run time: 01:50:27

Mr. Robbie Gilchrist

, of

Capital Marketing

, is a success story in point (66:12). Young fastener entrepreneur,

Tyson Clayton

, of

Desert Fasteners & Supply

, furthers the case in favor of grit and determination in the face of tough operating conditions (20:46). Also,

Fastener Technology International

editor,

Mike McNulty

, discusses the results of the latest

FDI survey

with analyst

Holden Lewis

, and explains how a fastener man makes his

NCAA tournament

picks (43:43). Hosts Brian Musker and Eric Dudas have their own ideas about fundamental change, as they anticipate a high velocity future driven by the wondrous miracle of

internal combustion

. Run time: 01:51:04

Ms. Terri O’Barski, of Hayes Bolt & Supply

, discusses the industry she knows and loves, and presents several observations sure to intrigue fastener suppliers and distributors alike (60:23). She also explains what it means to be known as a “fastener brat”.

Marc Weber, of Wurth USA

, speaks with

Mike McNulty

on the

Fastener News Report

, to describe the new partnership with GM dealers (41:59). Also,

International Fasteners

sales manager,

Joanne Bialas

, previews the upcoming SEFA spring conference, and describes “Twitter follower anxiety syndrome” (21:43). Destined for a hall all their own, hosts Brian Musker and Eric Dudas discuss a very famous muskie and a

multi-lobular

fastener predicament befalling the world’s best-known smart phone. Run time: 01:42:42

Mike McNulty

along with

BB&T analyst Holden Lewis

sort through responses to the first

FDI survey

and present their comments and analysis during the

Fastener News Report

(39:54). Next,

American Imperial Screw president, Jay Mont,

has been in the industry for 55 years (62:51). Does he agree with what the survey said? What are his thoughts on the future of importing and reshoring? Also,

Josh Glaser, of Glaser & Associates

, previews the upcoming

Pac-West Fastener Association

spring conference (22:44). Meanwhile, hosts Brian Musker and Eric Dudas marvel at the proliferation of international fastener shows, and take note of other assorted fastener-related

rigmarole

. Run time: 01:46:17

Special guest, Mr. Mike Wrenn

, discusses his experience during the collapse of

Heads and Threads

, and also his current mission to improve value for fastener distributors (57:35).

Joe Peplinski, of Beacon Fasteners

, presents his view of strong market conditions, and suggests that his marketing team may have gone insane, resulting in deep discounts for new customers (20:50).

Mike McNulty’s Fastener News Report

rounds up industry headlines, and features a discussion on the FIN annual fastener industry survey with

Jason Sandefur, of GlobalFastenerNews.com

(37:35). Hosts Brian Musker and Eric Dudas decide against wearing their Guy Fawkes masks as they consider their good fortune for having a secure place to host their website for the time being, and engage in broadly fastener-related conversation. Run time: 01:36:14

biggest fastener industry headlines

of the year gone by, and makes forecasts on the year ahead during this very special holiday edition. Industry blogger,

Traveling Salesman, Andy Pels, of ScrewCrew.com, along with the amazing J.R. Prahl

share their wit and wisdom, and also comment on their favorite FTR episodes of the season (53:13). The conversation includes input from industry luminaries

Andy Cohn, Joanne Bialas, Russ Doran, and Jennifer Friel

. Also,

Stelfast president and fastener industry rockstar, Simmi

discusses her thoughts on recent steel price reductions and the opening of a new branch location (40:13).

Mike McNulty presents the Fastener News Report

and delivers his 10 predictions for the New Year (27:43). Hosts Brian Musker and Eric Dudas speak of the future and speak of the past, and do it all with maximum

jolliness

, in predominantly fastener-related Fully Threaded style. Run time: 02:13:59

Cardinal Fastener

operate under its new ownership? What disastrous fastener-related mishap caused

Plymouth Rock

to split in half?

Steve Dunham, of Sasco Fasteners

, joins FTR to describe his work with

Extreme Makeover

Home Edition (71:18).

Marc Strandquist, of Dokka Fasteners, and John Grabner, of Cardinal Fastener

, share their insights for moving ahead now that the deal with

The Wurth Group

has closed (49:14).

Beacon Fasteners

quality manager,

Jerry Stoczanskyj

, explains what it takes to exceed industry quality standards in today's market (39:08). Also,

Jim Derry, of Field Fastener

, joins

Mike McNulty on the Fastener News Report

to discuss the acquisition of

Fastening Solutions

(21:48). Are Brian and Eric actually redistributionists? That would be completely different, and the answer is revealed as the boys serve up a Thanksgiving-sized portion of predominantly fastener-related programming. Run time: 01:55:23

NIFS '11

? Which big stories electrified the show floor, and which after parties created other kinds of buzz? Did

the new HTI

make its hoped for big splash? And what caused

Andy Pels

to cancel his show visit this year after his last minute Twitter post that rocked the industry? Discover the answers to these and other questions as

Rich Cavoto and Traveling Salesman

provide complete show coverage (65:55). Also, show floor interviews with

Vickie Lester, Bob Wegner, Jim Derry, Deb Douglas, Nancy Rich, Andy Graham

, plus many others round out this all-star NIFS wrap up (50:42).

Mike McNulty

delivers industry headlines including comments from show manager,

Susan Hurley

(20:34). Plus,

BB&T Capital Markets analyst, Holden Lewis

, comments on industrial distribution conditions in light of the EU situation, and introduces the forthcoming

Fastener Distributor's Index

(36:54). As for the FTR boys, Brian wears just the right tie for the occasion while Eric pilfers coffee from

the GOP

. Run time: 01:51:02

Fastener Technology International Magazine editor, Mike McNulty

, reports on the stunning "return" of Heads, along with

Jason Sandefur, of GlobalFastenerNews.com (24:25)

. Also,

SEFA president, Joanne Bialas

, makes an exclusive premier announcement on the direction of her organization, and introduces its new executive director, a well-known industry personality (39:21). 40 year fastener veteran,

Lou Boyd

, describes the state of domestic manufacturing and more in the Silicon Valley (47:12). Plus, poet, deep thinker and life long fastener man,

Charlie Accetta

, shares his thoughts on making life changes, and changing geopolitical times (72:24). Hosts Brian Musker and Eric Dudas are not surprised by the dearth of free pizza, they're ready to earn theirs. They think the remedy to improved business conditions and successful passage through corn mazes results from the same endeavor. Run time: 01:55:36

Mark Lehnardt

explains the newly re-emerged

Nucor

anti-dumping case (32:26).

Mike McNulty's Fastener News Report

has the latest updates on that story, plus details on the stalking horse bidder in the

Cardinal Fastener

bankruptcy case (20:04).

IFI chairman, Jennifer Friel,

shares her thoughts on domestic manufacturing and previews her upcoming appearance in Vegas (43:54). Also, fastener journeyman,

Rick Finau

, talks life in the fastener biz, cars, and his secret to marital bliss (70:16). Hosts Brian Musker and Eric Dudas are excited about their forthcoming pictorial, and it's a race against time as Brian's phone limps along just as

Apple

announces the release date of

iPhone 5

. Were they just talking about that, or...? Run time: 01:50:18

Don Haggerty reports on the new Stelfast branch

opening soon in L.A. (33:48).

Tom Buddenbohn of Technology Components Southwest

describes conditions in Texas as well as upcoming NFDA events. Will the association begin admitting reps? (62:42). Ace sales strategist

Ann Marie Houghtailing

joins the conversation from sun drenched San Diego, in advance of her presentations at Pac-West and Vegas (39:27). During his

Fastener News Report, Mike McNulty

features the latest on the acquisition of

Elgin Fastener Group,

including an interview with EFG president,

Jeff Liter

, and the Back Page Report sets a new gold standard for fastener editorial commentary (18:18). Hosts Brian Musker and Eric Dudas meander their way through another far reaching fastener radio adventure, and point out that in times of trouble there's usually a nearby place to get a good waffle. Run time: 01:44:19

Mike McNulty's Fastener News Report

covers

the Grainger / Fabory deal

, including insider observations by

BB&T Capital Markets analyst, Holden Lewis (15:17). Russ Doran, of Timberline Fasteners

, describes the industry from the Rocky Mountain region point of view, and previews the upcoming Pac-West fall conference (38:35). Industry sage,

Bruce Darling

, wraps up his summary of market conditions in the second of a two part series (64:47). Plus,

Beacon Fasteners and Components quality manager, Jerry Stoczanskyj

, discusses his recent elevation to three ASME standards committees (34:13). Hosts Brian Musker and Eric Dudas welcome title sponsor,

Stelfast

, and think there should be a replacement for the descriptor

flash mob

. They also explain the stormy demise of a mislaid and moistened iPhone. Run time: 01:40:18

Bruce Darling of Porteous Fastener Company (35:49)

and

NFDA vice president, Jay Queenin (25:17),

join hosts Brian Musker and Eric Dudas. Plus,

Computer Insights CEO, Denny Cowhey,

describes the genesis of his Business Edge ERP platform (60:39).

Mike McNulty's Fastener News Report

notes some positive trends for the industry, and laments egregious federal spending habits (15:57). Brian and Eric talk Twitter and consider the intelligence of IE users, while they solemnly hope for government change. Run time: (01:38:58)

Dokka Fasteners CEO, Marc Strandquist (43:43), and Rob Lucas of Fidelis Fasteners (65:26)

join hosts Brian Musker and Eric Dudas and share their perspectives.

Mike McNulty's Fastener News Report

discusses the chapter 11 filing of

Cardinal Fastener

, along with the latest industry headlines (15:13).

BB&T Capital Markets analyst, Holden Lewis,

presents a snapshot of current industrial trends and offers his insights on the wind market (28:25). In the most long winded edition to date, Brian and Eric contemplate fastener flash mobs and the blue screen of death, tilting at windmills through a fastener industry blow torch of their own design. Run time: 01:40:58

is back from Asia with his read on operating conditions and details of a new product line (30:38).

Pam Berry and Lou Aderman describe WIFI,

the new organization for women in the fastener biz (50:31).

Fastener Tech '11

attendees and organizers, including

Matt Ulrich, Andy Cohn, Jackie Ventura and Mark Klosek

offer comments from the show floor (22:47).

Mike McNulty's Fastener News Report

is focused on fasteners, as always, despite the surrounding mayhem of the industry's top regional show (10:11). Hosts Brian Musker and Eric Dudas consider the new IP version that will soon support the Internet, then turn their attentions to their upcoming muskie hunt. Will Eric's thumb recover in time to bag the next trophy? Run time: 01:29:56

PFC executive vice president, Bob Porteous (58:50), and incognito industry blogger, Traveling Salesman (36:27),

as they discuss these and other questions.

Mike McNulty, of Fastener Technology International Magazine, presents the Fastener News Report

and tells which categories of jobs are at greatest risk of elimination (17:02). Plus,

the lovely and talented Lynn Dempsey

interviews show attendees from the floor of the Branson show (28:41). Hosts Brian Musker and Eric Dudas invite listeners to Tweet more often, and ponder the true identity of a very familiar sounding voice. Run time: 01:31:31

shares his story along with thoughts on the end of HTI (46:00).

American Fastener Journal publisher, Mike McGuire,

offers his comments as the Columbus Show ends its 30 year run (31:30).

Mike McNulty presents the Fastener News Report,

and gives analysis of the troubles in Detroit (12:05). Plus, a report from the site of the second

Mel Kirsner Memorial Golf Tournament

tells the story of another victory for a legendary west coast golf team (22:44). Hosts Brian Musker and Eric Dudas develop their legal parlance as they delve into the equestrian side of bankruptcy proceedings. Brian heads to Branson, leaving Eric to tend the server farm. Run time: 01:26:31

fastener industry surges ahead

. Who is expanding to meet whatever the future might bring? What's the best thing distributors can do to protect margins? Who is gunning for the title currently held by Team Porteous? Listen in as

John Gaudette of Metric & Multistandard Components (34:55), Jim Derry of Field Fastener Supply (53:05) and Holden Lewis of BB&T Capital Markets (22:29)

offer their views on these and other subjects.

Mike McNulty presents the Fastener News Report

and unveils his plan to offset runaway government spending (12:48). Plus, hosts Brian Musker and Eric Dudas consider stashing gold bars and discover a new reality now that they can be tracked by their iPhones. Run time: (01:23:08)

is the lifeblood of the country, despite perceptions to the contrary.

Joe Greenslade of the IFI and Harry Moser of the Reshoring Initiative

offer their thoughts on buying domestic (46:16).

Russ Mellott of Activant Solutions

speaks on the software giant’s recent acquisition announcement (30:35), and

Janice Ceresa of Anixter

describes the latest goings on with the industry’s most widely subscribed LinkedIn group (36:17).

Fastener Technology International editor, Mike McNulty

, brings on the headlines, including more information about Heads and Threads (16:43). Hosts Brian Musker and Eric Dudas discover yet another exotic brew, and remain fearless despite the specter of

lurking aquatic birds

. Run time: 01:22:30

Brighton-Best sales VP, Steve Andrasik (53:08), incoming NFDA president, Matt Ulrich (34:51), and North Coast Fastener Association president, Kelly Hommel

(26:28), join hosts Brian Musker and Eric Dudas to discuss their events and invite industry participation.

Mike McNulty’s Fastener News Report

features a summary of industry developments, and includes thoughts on the disasters in Japan, and also the disastrous Chevy Volt (14:31). Mr. Musker reports on fastener distribution “down under”, while avoiding screeching

kookaburra and fruit bats

. Meanwhile, Eric tries to keep things moving along with mixed success. Run time: 01:18:48

Andy Cohn, of Duncan Bolt (30:48).

Perspectives from the front lines of the fastener industry with fastener blogger

Andy Pels, of ScrewCrew.com (56:22). Mike McNulty's Fastener News Report

with notes on ITW, Stuttgart show wrap up, and more (11:17). Plus,

Nancy Rich of the MWFA invites the industry to FastenerTech '11 (24:15)

. Hosts Brian Musker and Eric Dudas celebrate one year in the online fastener talk radio business with their usual semi-fastener related commentary, and observe the ongoing trend towards world domination by smart phones and robots. Run time: 01:36:32

discusses his return from semi-retirement (29:02).

John Wachman and Joe Greenslade

explain the upcoming FTI Certified Fastener Specialist program (62:09).

Southeast Fastener Association president, Joanne Bialas

, describes the upcoming SEFA Spring Conference (38:32). Also,

Mike McNulty, of Fastener Technology International

, presents the Fastener News Report (17:14). Hosts Brian Musker and Eric Dudas marvel at the modern world and bemoan the effects of global warming alarmism. Run time: 01:35:45

Bob Wegner, Joe Peplinski and Jerry Stoczanskyj of Beacon Fasteners and Components (38:06), and Heidi Voltrauer of the All American Fastener Show (28:54). FTI editor, Mike McNulty

, covers India, Fastenal, Acument and more, and presents the best and worst jobs of 2010 lists (16:26). Hosts Brian Musker and Eric Dudas discuss recent iPhone headlines and speculate how the world's most insidious villan might be tracked down. Run time: 01:29:44

talk mergers and acquisitions for fastener distributors (23:53).

Industry veteran Todd Walters

opines on the rebound of the structural segment while prospecting for new opportunities (55:07).

Mike McNulty, of Fastener Technology International,

delivers industry headlines on the latest Fastener News Report (12:37). Meanwhile, hosts Brian Musker and Eric Dudas deal in mellifluous tones, discuss the latest FCH improvements, and try to keep things in perspective. Whoever said silence is golden never heard this episode of FTR. Run time: 01:26:11

Leo Coar, of Distributor's LINK Magazine (32:49) and Rob Lucas, of Fidelis Fasteners (59:47)

, examine some of the contributing forces, both past and present, behind these changes.

Mike McNulty of Fastener Technology International (11:26) and Holden Lewis of BB&T Capital Markets (23:38)

present news and analysis. Also, hosts Brian and Eric consider world travel and agree that self-writing software would make life much easier. Run time: 01:29:59

Simmi, of Stelfast,

(27:52)

and fastener bloggers Traveling Salesman and Andy Pels

(54:30) join hosts Brian Musker and Eric Dudas for lively and informative conversation.

Mike McNulty, of Fastener Technology International

, presents the Fastener News Report. (15:09) Also, the FTR boys urge FCH members to refresh their inventory listings often, and explore some all new trade show concepts. Run time: 01:32:58

Pac-West president Andy Cohn (27:26), and Quickscrews International CEO Greg Wiener (58:28). Rob Lucas of Fidelis Fasteners

(17:38) leads off with a report on the recent Taiwan Fastener Show and current market conditions. Brian and Eric open the show with a powerful sound bite of renowned economist and

free market advocate, Dr. Milton Friedman

, and explain their feelings about the upcoming election. They also make a startling admission during the new "Screw-Up of the Week" segment, and discuss potential tattoo ideas for NIFS attendees. Run time: 01:30:11

Mike McNulty of Fastener Technology International (13:38) and Bonnie Carter of Metric Screw & Tool Company (25:20)

join hosts Brian Musker and Eric Dudas.

NFDA Fall Meeting coverage

discusses technology in the fastener industry with

David Panich, Frank Heenan, Jim Derry, Steen Hanson, Matt Ulrich

& more (44:14). A stalwart of the industry calls it quits, and we learn that George Washington had clear preferences in fastener standards. Run time: 01:26:25

Gary Polipnick of Fastenal (27:33) and Rob Lucas of Global Fastener Network (52:37)

join Brian Musker and Eric Dudas to discuss these and other issues. Also,

NFDA executive vice president Mark Lenhart

makes his FTR debut and describes the recent fall meeting (12:06). Brian and Eric explain the new FCH deep-linking feature and contemplate an all new beverage concept. Run time: 01:33:26

Allan Weitzman

, of Jay-Cee Sales & Rivet (28:08),

Chris Donnell

, of Scanwell Logistics (56:47), and analyst

Holden Lewis

, of BB&T Capital Markets (11:46), as they examine the answers and engage in desultory fastener-related conversation. Run time: 01:31:40

Matt Ulrich

(13:02), Fastener Technology International editor,

Mike McNulty

(27:03), and Ohio State University associate professor,

Dr. Tony Luscher

(53:58). Brian and Eric discuss Fastenal, sheep farming and that huge traffic jam in China. Old Rusty Bolt is served. Run time: 01:21:43

Jim Derry

shares association news and previews the upcoming Fall meeting in Chicago (13:42). QuickScrews International CEO,

Greg Wiener

, provides his perspective on the market and technology in the industry, and offers his unvarnished view of the current political climate (26:03). Industrial distribution consultant,

Frank Hurtte

of River Heights Consulting discusses his thoughts on prepping for trade conferences and staying aware of process in the quest for improved profitability (63:56). Hosts Brian Musker and Eric Dudas explain the latest improvements in the FCH environment, unveil their new battle flag, and rally listeners to voice their beliefs. Perfunctory

beer reportage

rounds out this episode of Fully Threaded Radio. Run time: 01:39:20

Mr. Mike McGuire

(48:23), Metric & Multistandard national sales manager

Rich Cavoto

(23:44), and a surprise pop-in guest as they discuss these and other issues. Also, market analyst

Holden Lewis

shares his perspectives in the wake of new earnings reports (09:12). Brian and Eric describe the new FCH program for NFDA members, and explain what happened to the lower unit of their boat during their recent

fishing

trip. Run time: 01:17:11